Pro-Tect Pool Enclosure Kit - Bronze

$59.99
(18 reviews) Write a Review
SKU:
PROTECTKITBR
Pro-Tect Pool Fastener Kit in Bronze

PRO-TECT Pool Enclosure Kit - Bronze

Buy the kit and SAVE! - This kit includes all items necessary for your installation - 100 Pro-Tect Sleeves, 100 Pro-Tect Caps, 100 1/4" x 3-1/4" Blue-Tap concrete screws, and a Pro-Tect auger. For a limited time - you also get a free 5/16" drive bit!

This pool enclosure kit is available in a choice of finishes; white or bronze.

The PRO-TECT* Fastener Protection System design allows for a sleeve to repel down to the firm concrete giving rigidity to the aluminum around the fastener reducing the risk of over torque and creating a gully in the aluminum where water will collect. This shaft encases the fastener and protects from salt, air and water intrusion.

With the added protection of the color matched glass reinforced nylon cap, water and salt is now repelled away from the fastener head. This Pro-Tect cap and sleeve system also solves the problem of electrolysis or aluminum deterioration and fastener corrosion due to dissimilar metals touching, as they are not in contact. Now a more cost effective, stronger, Miami-Dade Approved ceramic-coated Carbon Steel BLUE-TAP can be used, adding strength and stability to a now worry-free installation process. Please refer to our "How To" Videos tab for easy installation tips.

Videos Hide Videos Show Videos

18 Reviews Hide Reviews Show Reviews

  • 5
    Excellent product . Replaced 70 rusty screws. Had to use 2 drills but it did the job.

    Posted by John Iannone on Jul 27th 2020

    Excellent company fast service hope to do business with you in the future

  • 5
    Pro-Tect Kit

    Posted by Jerry Morris on Jul 10th 2020

    These were easy to install and worked great.

  • 5
    PRO-TECT POOL ENCLOSURE KIT - BRONZE

    Posted by evan bush on May 28th 2020

    Easy to install. Money well spent

  • 5
    Pro Tec Enclosure kit for Lanai cage

    Posted by Don on May 11th 2020

    Thanks for the excellent product. I struggled just a little at first. Once I had the technique evereything went perfectly. Once again thanks, would recommend you to others.

  • 5
    Incredible Product

    Posted by Bryan on May 5th 2020

    These worked exactly how described. Easy to use and will not have to worry about them for a long time. Would highly recommend.

  • 5
    PRO-TECT POOL ENCLOSURE KIT - BRONZE

    Posted by Richard M on Apr 20th 2020

    I was looking for a product to re-anchor my pool cage, as over half of the existing anchors had rusted away, and not much was holding it down; in Florida, that’s a big concern. I found this product online after looking for solutions and decided to purchase. I received the kit in a few days. Everything is included in the kit; you just need a good impact drill and driver. If you have ever used Tap-Cons before you should have no problems installing this, the sleeves fit perfectly when using the included drill bit properly. The Nylon caps fit tight and match the finish of the pool cage perfectly. I would recommend this product if you need to replace the existing pool cage anchors.

  • 5
    PRO-TECT POOL ENCLOSURE KIT - BRONZE

    Posted by Unknown on Dec 25th 2019

    Awesome product. East to install.

  • 5
    PRO-TECT POOL ENCLOSURE KIT - BRONZE

    Posted by Tom Sonick on Nov 19th 2019

    This kit included everything I needed to replace the old rusted out screws in the base of my lanai. Very fast shipping and a quality product.

  • 5
    Pro-tecdt Pool Enclosure Kit

    Posted by kenglekaKit on Jul 16th 2019

    The kit came promptly and was as described. I was pleased. When I attempted to drill into my pool deck I had difficulty drilling a hole. The supplied bits are masonry bits and were not designed to drill into my aggregate pool deck. I called Pro-Tect for help. The lady who answered the phone offered to check with contractors for advice. She called me back within an hour, told me I needed an SDS bit and offered to send two bits. The next day five bits arrived. I was able to drill successfully with the new bits. I would offer a hint to users. The tapcon screws did not drive easily and I rounded off the tops of two before they wee set. I backed them out, drove new screws until the drilling got difficult and then drove the screws the rest of the way with a socket wrench. Worked well. I was impressed with both the product and the service. Thanks.