Pro-Tect Pool Enclosure Kit - Bronze - Florida Fasteners Direct

Description

PRO-TECT Pool Enclosure Kit - Bronze

Buy the kit and SAVE! - This kit includes all items necessary for your installation - 100 Pro-Tect Sleeves, 100 Pro-Tect Caps, 100 1/4" x 3-1/4" Blue-Tap concrete screws, and a Pro-Tect auger. For a limited time - you also get a free 5/16" drive bit!

This pool enclosure kit is available in a choice of finishes; white or bronze.

The PRO-TECT* Fastener Protection System design allows for a sleeve to repel down to the firm concrete giving rigidity to the aluminum around the fastener reducing the risk of over torque and creating a gully in the aluminum where water will collect. This shaft encases the fastener and protects from salt, air and water intrusion.

With the added protection of the color matched glass reinforced nylon cap, water and salt is now repelled away from the fastener head. This Pro-Tect cap and sleeve system also solves the problem of electrolysis or aluminum deterioration and fastener corrosion due to dissimilar metals touching, as they are not in contact. Now a more cost effective, stronger, Miami-Dade Approved ceramic-coated Carbon Steel BLUE-TAP can be used, adding strength and stability to a now worry-free installation process. Please refer to our "How To" Videos tab for easy installation tips.

37 Reviews Hide Reviews Show Reviews

5
Awesome product

Posted by Andrew J Beck on Aug 10th 2020

I used the Pro-Tect Pool enclosure kit to replace all the rusted out and broken screws on my cage bottom. It worked perfectly and looks 1000% better than before. I will be back to to purchase some Nylo-Tec screws to replace the all the others. Great product and HIGHLY recommend.
5
Excellent product . Replaced 70 rusty screws. Had to use 2 drills but it did the job.

Posted by John Iannone on Jul 27th 2020

Excellent company fast service hope to do business with you in the future
5
Pro-Tect Kit

Posted by Jerry Morris on Jul 10th 2020

These were easy to install and worked great.
5
PRO-TECT POOL ENCLOSURE KIT - BRONZE

Posted by evan bush on May 28th 2020

Easy to install. Money well spent
5
Pro Tec Enclosure kit for Lanai cage

Posted by Don on May 11th 2020

Thanks for the excellent product. I struggled just a little at first. Once I had the technique evereything went perfectly. Once again thanks, would recommend you to others.
5
Incredible Product

Posted by Bryan on May 5th 2020

These worked exactly how described. Easy to use and will not have to worry about them for a long time. Would highly recommend.
5
PRO-TECT POOL ENCLOSURE KIT - BRONZE

Posted by Richard M on Apr 20th 2020

I was looking for a product to re-anchor my pool cage, as over half of the existing anchors had rusted away, and not much was holding it down; in Florida, that’s a big concern. I found this product online after looking for solutions and decided to purchase. I received the kit in a few days. Everything is included in the kit; you just need a good impact drill and driver. If you have ever used Tap-Cons before you should have no problems installing this, the sleeves fit perfectly when using the included drill bit properly. The Nylon caps fit tight and match the finish of the pool cage perfectly. I would recommend this product if you need to replace the existing pool cage anchors.
5
PRO-TECT POOL ENCLOSURE KIT - BRONZE

Posted by Unknown on Dec 25th 2019

Awesome product. East to install.
5
PRO-TECT POOL ENCLOSURE KIT - BRONZE

Posted by Tom Sonick on Nov 19th 2019

This kit included everything I needed to replace the old rusted out screws in the base of my lanai. Very fast shipping and a quality product.